Page 4 , in 12 pages
andard Treatment Process
2.1 Form filling
Fill in the blanks of the Client File, confirm the treatment program, remind the client pay
attention to some points before and after treatment.
2.2 Face cleaning
Clean the face with gentle face cream for 3 minutes.
Remind: clean the hands of operator and the handpiece with bromogeramine.
2.3 Preheating
Start the equipment after face cleaning, preheat for not less than 3 minutes (without lighting
the xenon lamp).
2.4 Shaving
Shave the unwanted hair of the treatment area(2 minutes).
2.5 Gel coating
Coating the gel evenly (2-3mm) on the skin.
Effect
：
light guide, cooling, anaesthetisin.
Attention: no coating on eyes, eyebrows, lips.
2.6 Eye protection
Operator: wear the safety goggles.
Patient: close the eyes, wear professional safety goggles or cover the eyes with eye patch.
2.7 Allergic test
Emit 2 or 3 light spots in the bottom of ears in safe parameter, observe for 3 minutes.
Effect: do not continue to operate if there is a allergic phenomena.
2.8 Operation
Carry on the operation with a suitable parameter to the operatee.
Attention
：
2.8.1 Inform the operatee that there will be a slight pricking in operation before operating, to
avoid panic.
2.8.2 Start the operation with a low energy grade, adjust the parameters in operating while asking
the feeling of the operatee.
