Page 10 , in 12 pages
interval and suitable energy of parameter value.
Ⅴ.
Safety Notice
4.1. Safety of E-light
The equipment takes maximum consideration of the safety of both operator and operatee in
the designing, the following are some safe measures of it:
Circuit self-checking after machine starting;
Using filter/light guide crystal, strong pulse light comes out only from the front side of the
handpiece.
Designed with independent safety circuit, electricity could be shut down automatically when
the IPL power is to high;
Emergency stop switch, shut down the power in emergency;
Key switch to avoid starting the machine by any people;
Use high quality engineering plastic frame, preventing electricity creepage.
【
Alarm
】
All strong pulsed light device may cause hurt by improper handling. Operators should keep
vigilant and take necessary protection measures according to the manual.
Operatee: Carry out the treatment in the professional treatment room; take effective eye
protecting measure;
Operator: wearing protective glasses;
Treatment room
：
marked the treatment room clearly with in operating of IPL.
To ensure to the safe use of the equipment, please read the following instructions carefully.
No one except technician authorized by the manufacture could dismantle or repair the
equipment, especially for the power source, handpiece; high voltage electricity inside;
Voltage rating: 110-120V;
Maintaining the equipment after disconnecting the power cord;
Keep the handpiece clean all the time; do not let the gel leaking into the handpiece;
In case leaking of the handpiece, do not start the equipment; already started, turning off
immediately;
No emitting light to one area repeatedly, otherwise may cause inflaming or burns, and may
