6
HNG features
The Sagemcom 5356 HNG is capable of utilising different
forms of access technology to access the World Wide Web
(www).
HNG Features
•
VDSL / Fibre /ADSL2+
•
Wi-Fi 802.11n 2.4Ghz (2 x 2)
– backward compatible with
802.11 b/g Wi-Fi 802.11ac 5Ghz (3 x 3)
•
Two 10/100 BASE-T (Fast Ethernet) LAN Ports to
provide wired connectivity (Yellow)
•
One 100/1000 GigE WAN port
– Capable of supporting
full 100Mbps throughput for NBN & FTTP (Red)
•
Hybrid WPA & WPA2 capability
•
Wireless Protected Setup (WPS), including a push button switch
to activate WPS for simplified and secure wireless setup.
•
2x USB 2.0 Interfaces
−
x1 USB master port rated at 1000mA on the front of the case
(HDD friendly)
−
x1 USB master port rated at 500mA at the bottom
−
Both USB now supports NTFS and FAT32 format
•
Built in DLNA (Media Server) capability to provide more
simple connectivity and ability to share Multimedia
content with DLNA certified internet ready devices
(i.e. TVs, Digital Cameras etc) within the Home Network
•
This router firewall supports UPnP connections which
enable PS3 and Xbox network support
•
IPv6 capable
– Gateway will be ready for the
migration onto the IPv6 environment
•
12vDC 2A plug pack (only to be used with the 5356 HNG)
•
1 FXO analogue port (incoming analogue must be
filtered if using a DECT on ADSL connection)
•
1 FXS port supporting legacy analogue CPE
like faxes, phones (NBN only)
Advanced features
GUI (Graphical User Interface)
The GUI can be accessed by either Ethernet or wireless with
the default IP address 10.0.0.138 this will bring up the below
HOME screen and from here you will be able to configure
the 5355 Gateway is required.
There are 8 main menus:
•
Home screen
•
Broadband
•
Wi-Fi
•
Content Sharing
•
Parental Control
•
Services
•
User Settings
•
Advanced
From each of these menus you will be able to view sub-menus
which will indicate current details and also give you the ability to
configure changes where appropriated to achieve the
customer’s
requirements.
Wireless Network Connections (Wi-Fi)
The Home Network Gateway has two Wi-Fi networks, 2.4G and
5G. Factory default network ID (SSID) and passwords (key) for
these wireless networks can be found on the Wi-Fi information
label provided in the box, and on the label attached to the back
of the HNG itself. Wireless network ID & password (key) can be
changed via the user interface if needed.
Wireless network connections can be achieved by entering the
HNGs password on your wireless device (once the wireless
device detects the HNGs wireless network identified by the
network ID (SSID)), or by pressing the Wi-Fi (Wi-Fi protected
setup) button on your HNG, which will begin to flash orange and
then solid green when Wi-Fi is on.
DECT Phone Pairing
DECT Phone Pairing can be established without accessing the
user interface by simply pressing the PAIR button continuously
for greater than 1 second.
This action puts the DECT base station in pairing mode
– the
PAIR light will flash White. Next, activate the pairing on your
compatible DECT phone to complete the action, when PAIR
light will turn solid Green.
Note: a compatible DECT phone is required to enjoy all the
features available from your HNG (DECT phone is not supplied).
