Before using your Marodyne LiV device, please familiarise yourself with
the ‘Instructions for Use’ guide enclosed with your device
Connect the power cord into the
switching adaptor
Plug the power cord into the
back of the device
Connect the AC power plug into
a mains power socket. A green
light will display on the power
brick to indicate the device is
receiving power
Switch the device on using the
rocker switch located at the
back of the device. A blue light
will signal it is successfully
switched on
V4 - 14/07/2022
Place your device on a dry, hard
and level floor (e.g. a tile/stone
floor or a thin carpet)
Ensure the device is positioned
where you intend to use it.
When the device is powered on,
it must not be moved
Do not wear shoes while using
the device. It is recommended
you wear socks
Step onto the device from the
back and place your feet
approximately shoulder width
apart. It is recommended you
stand on the device with your
big toes in line with the bottom
of the Marodyne LiV logo
Once the calibration is
complete, the word ‘Go’ will
display on the device and a
beep indicates it’s ready for
use. A single green light at the
centre of the feet indicates the
device is in standby mode, and
you can begin your session
When switched on, the device
will undergo a series of light
cycles as it calibrates
