2x
✗
✗
✓
9.
Ensure that the two brackets within each tray are pushed towards each other
and the screws loosened.
Place the cutting machine onto the trays and locate the ribs on the underside into
the notches in the raised edges of the trays.
Pull the brackets and screws apart to lock the cutter to the stand and tighten the
screws.
10.
For the cutter the grip the material being cut , and cut accurately the base of
the cutter must be set flat. Using the level adjuster
(J)
screw it up or down to
support the base accordingly.
9
10
j
e
f
Add the waste catcher bag and your cutter is ready for use.
