MyBinding IDEAL 4850-95 EP, Instruction Manual

Page: 7 / 18

IDEAL 4850-95 EP; IDEAL 5221-95 EP; IDEAL 6550-95 EP
6
01-01-23 B5221G1A doc
3. Operation
s
Danger!
The machine may only be operated by
persons who have read and understood the
operating instructions and safety
instructions.
s
Danger!
Check safety devices are complete and
function prior to starting the machine.
Checklist
- Machine panels:
All panels must be mounted
- Cutting activation:
Open the safety guard (1).
The cutting mechanism starts through a "two-
handed control system" (2). The cutting
mechanism should only start if the guard is
closed and the buttons of the two handed
control system are pressed exactly at the
same time.
- Guard didn't closed itself
Þ
otherwise replace
the gasspring.
It is recommended to keep a check handbook.
3.1 Operating elements
(1) Guard
(2) Two-hand activation
(3) Backgauge control
(4) Clamp returns
(5) Main switch
(6) Rotary control for backgauge setting
(7) Key switch
(8) Pre-clamping
(10) Dimensions display (cm or inch)
(11) - Programmable dimension
- Eject function
(12) Programmable dimension
(13) Stop & Clear; annulation & correction
(14) Start
(15) Memory / Dimension repeat
(16) Numerical keypad
(17) Changeover cm/inch.
(19) Clear program
(20) select program
(21) Enter
(22) Program number
(23) Program step
(24) Display repeat cut
(25) Specified dimension
Pre-clamping:
+
Clamp returns:
Cutting sequence with automatic clamping:
+