Stable Reading Indication: This is a very precise scale - the display may seem to wander or jump when weighing.
This is due to air currents or vibrations. Stable weighing is achieved when the display remains fixed for 3 seconds.
* Overload: When an applied load exceeds the capacity. “HHHH” will appear on the display. Remove excessive
load immediately. The unit may return to normal operation. !Remember: You can permanently damage the scale
and void your warranty by overloading it!
* Negative Value: Any tared value will be displayed as a negative number once all weight is removed, press TARE
or cycle the power to re-zero the scale.
* Auto off: An auto shut off feature is provided to conserve battery power. The unit will automatically turn off after
approximately 2 minutes of inactivity.
*Stable Indicator: There is a “o” stable indicator that appears on the left side of the LCD whenever the scale is
stable and at Zero
* Special Tray/Cover
The protective cover of the Triton is designed to also be used as a platform expansion tray. The cover can only be
removed when the scale is fully open. Simply fully open the scale to unlock the cover and slide the cover towards
the left of the scale. As pictured on the box, the cover can be used as a tray. Place it on the scale
ʼ
s weighing
platform and turn the scale ON. The scale will automatically TARE (zero) itself with the tray on the scale.(if this
does not work properly, you can turn the scale ON, then place the upside down cover on the tray and press the
TARE key) This is perfect for weighing loose objects, gunpowder, gems, Chinese herbs and more.
Please keep the protective cover installed when the scale is not in use (it will help protect the scale from possible
damage)
KEY PAD FUNCTIONS
* ON/OFF
Press and quickly release this key to turn unit on.
Press and hold to turn off scale
* TARE / ZERO
Press tare to reset the scale to zero. Tare can be used for eliminating the weight value of an empty container. Place
an empty container on the scale and press TARE. Then place the items to be weighed in the container. Tare is also
used as MEMORY. Simply place items to be weighed on the tray, press TARE then remove the items. The weight
of the items will be displayed as a negative value and remain on the display in memory for easy reading.
NOTE: When all weight is removed from the weighing tray, the tared value of a container will be displayed as a
negative number. Depress tare again to return the to zero.
* CAL
The Cal Key is used to put the scale in Calibration mode as explained in the calibration instructions on the other
page.
** These electronic scale are precision instruments. Do not attempt to weigh near an in-use cell phone, radio,
computer or other electronic device. These devices emit RF and can cause incorrect or unstable scale readings.
Only operate in an interference free, very stable environment. If your scale ever performs poorly, try moving the
scale to a different location.
Please take good care of your TRITON T2 !
