AC•THOR
®
/ AC•THOR
®
9s Operating instructions, version a0020806
31
Follow the download link (above) and save the file locally, then open the file to access the Web-
Interface. Alternatively, you can open the Web-Interface directly in your web browser (link below).
my-PV does not r
ecommend to connect the AC•THOR
to the Internet via port forwarding
access!
From Ethernet firmware version a0020000 applies:
To be able to access the Web-Interface of AC
•THOR
in systems without internet access, please
download the required HTML file in advance via this link:
http://www.my-pv.com/download/currentversionget.php
If the Web-Interface is started via the scanner program
(see chapter “
Search for devices in the
network
“
, the connection to the device is established automatically.
From firmware version a0020202 onwards, the current Web-Interface allows the selection of French
or Spanish in addition to German and English.
If the Web-Interface is started by calling the HTML file, the IP address range of the network in
which the device is located must be set once. The entry is saved by the web browser, but the
address range can be redefined at any time using the "IP Search Range" button.
