My Geko Gear ORBT 956, Quick User Manual

Page: 7 / 20

Time Lapse — Off(Default)/ On
On: The dash cam can sustain longer operational period while reducing video file
size. Video files will be played at high-speed when playback.
Exposure — -2.0/ -1.7/ -1.3/ -1.0/ -0.7/ -0.3/ 0(Default)/ +0.3/ +0.7/ +1.0/
+1.3/ +1.7/ +2.0
To adjust video exposure setting for either brighter or darker video according to
your preference.
Motion Detection — On/ Off(Default)
Motion detection is a memory saving feature which only records footage where
motion is taking place. You should NEVER drive your car with it enabled - as this
will confuse the camera as you stop and start at lights etc.
Motion Detection is designed to be used for surveillance when your car is parked
and NOT moving. Usually when you are not inside your car. During your car is
parked and you wanted continuous surveillance.
NOTE: The Sensitivity is affected by many factors, and the available distance is
about 3 meters.
Record Audio — On(Default)/ Off
The dash cam has built-in microphone to record audio with video. You can choose
to record mute video by choosing OFF. You can also press to mute/un-mute
while video is being recorded.
Video Stamp — On(Default)/ Off
Date/Time, Latitude and longitude / live speed information will be shown on the
videos when enabled.
WiFi— On/ Off(Default)
On: The screen will display the name: Orbit 956_ac64cf4df35c and its password:
12345678.
Please keep your phone close to the dash cam (within 3m) when using WiFi, you
could control the dash cam and check the real-time video by ORBIT CAM APP on
your phone.
When enabled the dash cam won’t response to your operation by pressing the
buttons.
GPS Info
To get GPS live information: numbers of satellite, live speed, longitude, latitude.
Backup Cam Mirror — Off(Default)/ On
This feature works only on the rear camera image.
On：The image of the rear camera is as same as in the rear mirror, what on the left
in reality -> on the right of the dash cam screen;
Off:：The rear camera image is as same as what you see, what on the left in reality
-> on the left of the dash cam screen."
WDR — On/ Off(Default)
Wide Dynamic Range (WDR) processes images to ensure clear recordings in bright
and dark light. This allows the Dash Cam to combine multiple images at different
levels of brightness to create one superior image.
Parking Monitoring — On/ Off(Default)
Designed to work when dash-cam is shaken during HIT&RUN event while your car
is parked. When your car gets hit and shacked, the dash cam will turn on
automatically, and start recording for 1min on internal battery, then lock that
video file before automatically turn-off, so the video file won’t erased by loop
recording function.
Please note: While you use the dash cam and the car is running, please turn OFF
this function, otherwise the dash cam will automatically turn on and off randomly.
The internal battery can provide power up to 2-3mins when it is fully charged. If
you want 24h monitoring, please use a hardwire kit to connect the dash cam to
your car battery (hardwire kit not included in the package).
G-Sensor — Off/ High/ Medium(Default)/ Low
G-sensor is a 3-axis impact gravitational accelerometer, designed to detect
physical and gravitational forces on the dash cam. Once G-sensor has triggered
due to physical or gravitational impact force on the camera, the current video file
will be locked as an emergency file so it won’t be deleted by loop cycle function.