My Geko Gear ORBT 956, Quick User Manual

Page: 10 / 20

1. Please remove the Micro SD card from camera and insert it directly in your
laptop if you have a Micro SD Card slot (otherwise please using a Micro SD Card
reader).
2. You should be able to see drive "D" or "E" or other name depending on the
pre-installed hard drives.Once you find the added flash drive, double click in it,
then you will see the Novatek- Movie / LOCK
Movie：The loop recording video files that can be overwritten.
LOCK：The video file will be locked so it will NOT be deleted by loop recording
function.
3. Then simply double click on the video to play them.
File named *********A=Front dashcam video file
File named *********B=Rear camera video file
Q：Camera showing "Memory Error" or "Please Insert Micro SD Card" even
though Micro SD card is already installed into the camera.
A：Please make sure Micro SD card is at least U3 and purchased from trusted
vendor such as Walmart, target, best buy, Ship & Sold by Amazon" etc.
Go to camera's system settings and FORMAT your Micro SD card. (make sure to
backup your videos first before formatting the Micr o SD card.) After formatting
Miro SD card, please press and hold power button to turn the camera off. Now
unplug power cable, and re-plug the power cable, camera should now turn ON
automatically and start recording.If still error please contact us.
Q：The date/time always changed.
A： Please be sure to charge your camera for at least for 6 hours.Then go to
camera's system settings > Time Zone Setting > Set your correct timezone > OK
to confirm. The date/time will updated when get GPS signal.
Q：Dashcam always turn on automatically.
A：Please RESET dashcam and update the firmware to fix the problem, if doesn’t
work please contact us.
The videos/pictures taken by Car dash cam is only for a reference, we don’t take
any responsibility due to data-loss in the abnormal circumstances. Special version:
The device will records files in normal recording status. But in the following
situation, it will lead to files to be damaged or lost;
1. If pulling out the TF card in the recording status, final video files will be
damaged or lost.
2. If there is illegal blackout in the recording status, final video files will be
damaged or lost.
3. If there is a destructive collision in the recording status, video and audio files
will be damaged or lost.
4. If there is a destructive collision in the recording status leading to Memory card
loose, video and audio files will be damaged or lost.
READING DASHCAM FILES FAQ
DISCLAIMER