page 5
Invisible rectangle used for
transparency flattening
do not delete
Positioning the seat
Preparing the ISOFIX stability connectors
The child car seat can only be used with
an automatic 3-point safety belt (A) and
NOT
with a 2-point lap belt (B).
The child car seat can be secured in
a forward-facing position in the rear
seats of the vehicle by using the existing
seat belts. However, on some seats, if
the installation is not properly secured,
we suggest you try another seat in your
vehicle.
Although not recommended, the child
car seat can be used on a passenger
side front seat, so long as there is no
active airbag.
WARNING: Never use in a seat with an
active airbag.
Place the seat face down so you can see the base.
Pull the release handle (A) and at the same time pull out the recline block (B).
Rotate the connectors (C) into position, then pull handle (A) and push the recline
block (B) back in.
A
B
B
A
A
C
