page 13
Invisible rectangle used for
transparency flattening
do not delete
Removing and replacing the cover
WARNING: The cover is a safety feature.
Never use the child car seat without it.
Remove the seat base cover by
unfastening the two press studs (A)
along the back edge of the base and
cover pulling the cover forward and off.
Remove the seat backrest cover by
holding the bottom edge of the cover,
pulling up and off (B).
Remove the small seat back cover by
unhooking the elastic loops, starting at
the top.
To refit the cover, follow the steps above in reverse (C, B, A).
Starting with the small back cover attach it to the shell using the elastic (C).
Slide the backrest cover over the backrest attach the Velcro
®
tabs and feed the
plastic edging on the cover into the grooves around the edge of the shell (B).
Finally slide the seat base cover (A) on, attach the two press studs tabs and
feed the plastic edging on the cover into the grooves along the front edge of the shell.
A
B
C
