background image

page 19

Regularly inspect the locking devices, brakes (check for wear, alignment and 

functionality), harness assembly, catches, seat adjusters, joints, fittings and folding 

areas to ensure they are in full working order. Brakes and wheels are subject to wear 

and should be replaced when necessary. All replacements and repairs should only be 

carried out by an authorised dealer. Only use parts and accessories approved by the 

manufacturer. Non-approved parts and accessories may be unsafe and must not be 

used. Wipe clean with damp cloth and mild detergent [never use bleach or abrasives].

Ride-on platform attachments

This product has not been tested with a ride-on platform. Consult your retailer for 

suitability if you are considering getting a ride-on platform. Any damage resulting from 

the use of a non-approved ride-on platform will not be covered by the warranty.

Other attachments

The Magnet chassis is designed to be compatible with the Magnet seat unit and the 

Magnet carrycot. The Magnet chassis is also compatible with the Maxi-Cosi Cabrio-Fix 

and Pebble Car Seat when used with the supplied Maxi-Cosi Adaptors. 

Do not attempt to fit any other attachments. Any damage resulting from use of a 

non-approved attachment will not be covered by the warranty.

Care of the seat cover

The seat cover is not removable. Wipe clean with damp cloth and mild detergent 

[never use bleach or abrasives]. 

DO NOT

 machine wash.

Care of the raincover

A. The raincover can be cleaned by sponging with warm water and mild detergent.

B. If your child tends to kick the cover, simply release the foot elastics to avoid damage 

to the raincover.

Warning:

 This cover is for outdoor use only. The raincover must be removed if the child 

remains in the pushchair indoors, otherwise the child may overheat. Remove the 

raincover in warm sunny weather.

Note:

 Do not put in your car on hot days, as this will damage your raincover.

Care and Maintenance

Your 3 year warranty

Whilst we make and test our products to the highest standards of durability there’s 

always a small chance of a hiccup! Our promise is to repair, replace or refund a MyChild 

product that has an identified manufacturing defect from the date of purchase for a full 

3 years thereafter at no extra cost.

However, you must register within 28 days of the date of purchase to receive the full 3 

years guarantee!

To receive your full guarantee you can register your product by: 

visiting www.mychild.co.uk/warranty.html and complete the warranty form, 

or by telephone on 0161 335 2508.

Summary of Contents for Magnet Reversible Pushchair





















Reviews: