page 4
Opening and closing the baby walker
Attaching the walker’s front wheels
B
B
C
C
A
1. To open, or raise the height, ensure
that block (A) is in the unlocked position
(B). Hold either side of the upper part of
the walker and pull upwards to one of
the 3 height positions. Ensure the upper
part clicks into position. When at the
desired height turn the lock to the locked
position (C).
2. To close or lower the height, first ensure
block (A) is unlocked (B) then pull block
(A) forward and lower the upper part.
When at the desired height turn the lock
to the locked position (C).
WARNING! NEVER adjust the height when your child is in the walker. DO NOT place your
child in until you have adjusted the height and locked the height adjust lock.
3. With the baby walker upside down
and fully folded down, insert the two front
wheels into each round hole on either
corner at the front of the walker.
Tip:
Use the provided wheel pusher tool
to press the wheels in (tap the back of
the wheel pusher lightly with a hammer if
required).
click
A
