DD25V3 | Dookie Drive
™
Pedal
4
Basic Operation
1. Run a cable from your guitar to the DD25’s INPUT
jack and run another cable from the DD25’s OUTPUT
jack to your amplifier.
2. Start with all controls at 12 o’clock.
3. Turn the effect on by depressing the footswitch.
4. Rotate BLEND knob clockwise for more of the
High Gain sound or counterclockwise for more of the
Crunch Gain sound.
5. Rotate OUTPUT knob counterclockwise to increase
overall volume or counterclockwise to decrease it.
6. Push SCOOP switch to the IN position to cut
midrange frequencies for a modern scooped sound.
7. Rotate GAIN knob clockwise to increase intensity
of High Gain circuit overdrive or counterclockwise to
decrease it.
8. Rotate TONE knob clockwise for a brighter sound or
counterclockwise for a warmer sound.
9. Rotate internal CRUNCH GAIN knob to increase
intensity of Crunch Gain overdrive or counterclockwise
to decrease it.
10. Rotate internal CRUNCH VOLUME knob
to increase volume of Crunch Gain circuit or
counterclockwise to decrease it.
The Dookie Drive
™
Pedal is powered by one 9-volt
battery (remove bottom plate to install), the Dunlop
ECB003 9-volt adapter, or the DC Brick
™
, Iso-Brick
™
,
and Mini Iso-Brick
™
power supplies.
Power
Directions
