MXN MXN-P7D, Owner'S Manual

Page: 8 / 16

7" TFT DIGITAL LCD Monitor
8
TRIGGER 1/2/3 (Trigger source selection)
Select the required trigger source at CAM1/CAM2/CAM3.
REMARK
TRIGGER PRIORITY: TRIGGER 1 > TRIGGER 2 > TRIGGER 3
CAM1 DIST. MARKER
Select
ON
to have distance marker (parking line) for
CAM1
.
Distance marker is displayed as soon as
TRIGGER 1
signal is activated.
SPEED SWITCH
The orange wire needs to be connected with the vehicle’s tacho signal and via
MENU
the
SPEED
SWITCH
needs to be selected
ON
.
At FREQUENCY 67Hz setting(and most common used tacho signal) the selected camera will be
displayed during a speed of 0~33km/h. Select the concerning camera via
『
UNDER FREQUENCY
CH :
』
(At different type tacho signals the FREQUENCY needs to be adjusted into higher or lower
value than this example)
Over 33km/h (72Hz) the selected camera will be switched OFF automatically. When the speed
slows down, then the selected camera will be switched ON automatically again at 30km/h.
Instead of automatic switch OFF at a speed over 33km/h it is also possible to activate another
video source, such as a navigation picture from an optional navigation computer. In this case
user needs to select
『
OVER FREQUENCY DISPLAY
:
ON
』
and user needs to select
『
OVER
FREQUENCY CH
:
』
In case of
TRIGGER
activation during
『
SPEED SWITCH ON
』
mode, then
TRIGGERS
1~ 3 will
overrule
『
SPEED SWITCH
』
function.
CAMERA TRIGGER
CAMERA TRIGGER
TRIGGER 1 CAM1/CAM2/CAM3
TRIGGER 2 CAM2/CAM3/CAM1
TRIGGER 3 CAM3/CAM1/CAM2
CAM1 DIST. MARKER MARKER ON/OFF
SPEED SWITCH ON/OFF
FREQUENCY 67 Hz
UNDER FREQ. CAM CAM3/CAM1/CAM2
OVER FREQUENCY DISPLAY ON/OFF
OVER FREQ. CAM CAM1/CAM2/CAM3
▣
SYSTEM SETTING