17
Subject to modifications
• 19, rue de Rennes • BP 83221 • F - 35690 ACIGNÉ
14.
MAINTENANCE
Lubricate every 10 hours and after each wash (water drives grease out)
and particularly after washing with a pressure washer. See lubrication
points opposite.
Check fasteners for tightness after 10 and 50 hours of operation, every
100 hours thereafter, keeping to the recommended tightening torque.
On each occasion, check before and after use for any hydraulic leaks
which might have appeared and that the pins and locking pins are
all fitted.
The frame and rams are fitted with wear bushes. If there is excessive
play (approx. 2 mm), replace them with new genuine MX bushes.
Front power take-off:
After the first 50 hours and every 500 tractor operating hours thereafter (or once a year):
—
Drain the oil and replace the filter with a new genuine MX one (see filter removal procedure below).
—
Next, refill the housing with oil up to the level shown opposite. Recommend oil type STOU (Supper Tractor Oil Universal)
10W30 or 10W40 or equivalent.
NOTE:
Check power take-off housing oil level regularly and top up as necessary.
