MX Atmos Select Round Installation And Operating Instructions Manual Download Page 13

Page: 13 / 16

COMPONENTS LIST

Atmos Select Square Style (HLG)

Description

Quantity

Brass Select Mixer Valve

Blanking

Nut

Filter

Washer

Mixer Valve Screw Pack

Allen

key

Trim plate Valve Cover

Pressure Balance Kit (15mm)

Flow Rest Washer

Square Wall Outlet

Cube Riser Rail

Riser Rail Fixing Bracket

Square Height Adjuster

Riser Rail Screw Pack

Single Mode Handset

Square Hose Retaining Ring

1.5m Hose + Washers

Square Soap Dish

Square

Overhead

Overhead Square Arm

Fitting Instructions

TMV Registration Card

Flow

Controller

Atmos Select Round Style (HLI)

Description

Quantity

Brass Select Mixer Valve

Blanking

Nut

Filter

Washer

Mixer Valve Screw Pack

Allen key

Trim plate Valve Cover

Pressure Balance Kit (15mm)

Flow Rest Washer

Circular Wall Outlet

Fusion Riser Rail

Riser Rail Fixing Bracket

Push-Button Height Adjuster

Riser Rail Screw Pack

Multi Mode Handset

Circular Hose Retaining Ring

1.5m Hose + Washers

Circular

Overhead

Overhead Circular Arm

Fitting Instructions

TMV Registration Card

Flow Controller 2

MX GROUP GUARANTEE

Marleton Cross Limited and its subsidiaries (“MX Group”) hope you are satisfied with your

purchase and in the unlikely event that you encounter a problem which is caused exclusively by

MX Group manufactured product (the “product”) we will take responsibility on the terms set out

here.

We guarantee this product, in the following terms, for a period of 5 years, from the date of

delivery, against mechanical defects arising from faulty materials or from poor workmanship,

providing the product has been:

• Installed in accordance with the fitting instructions (oral or written), technical information

supplied and/or associated advertising; and

• Used strictly in accordance with all our instructions (oral or written), associated advertising and

technical data (including product information and specification sheets) current at the time of

purchase and good working practice.

MX Group at their discretion undertake to repair or replace without charge, provided the

product has been properly installed, maintained and operated in accordance with the operating

instructions.

This product must not be modified, repaired or taken apart except by a person authorised by

MX Group.

MX Atmos Select 6752B 09_14_GF.indd 13

24/10/2014 14:57

Summary of Contents for Atmos Select Round

















Search results

Summary of Contents for Atmos Select Round

Reviews:

Related manuals for Atmos Select Round

Brands by name

Popular brands

MX Atmos Select Round, Installation And Operating Instructions Manual

Search results

Summary of Contents for Atmos Select Round

Reviews:

Related manuals for Atmos Select Round

Brands by name

Popular brands