background image

RAPID  CHANGE  WEIGHT  SYSTEMS

RAPID CHANGE 

WEIGHT SYSTEMS

sales@mxselect.com www.mxselect.com

SELECT

3

............................  

Turn the Cradle over as pictured below, on a soft surface that will not damage Cradle finish. 

Ensure the Cradle is stable.

.....................................  Turn the Cradle over onto the Cradle Feet. Place Cradles where you intend to use them before 

placing MX Dumbbell Handset into the Cradles.

PUSH FEET 

FIRMLY 

AGAINST 

CRADLE 

BEFORE 

TIGHTENING 

BOLTS

............................  Line up the holes in the first of the Cradle Feet with the holes in the Cradle. Put the Cradle Bolts and 
washers in loosely. Push the Cradle Feet inwards firmly against the Cradle (direction of the arrow) and tighten the 
Bolts. Repeat for each of the four Cradle Feet for each Cradle. 

CHECK THAT ALL SCREWS ARE TIGHT.

.........................  

Remove the Cradle from the box and place on a flat surface.

Slotted holes in 

Cradle Feet for 

the Cradle Bolts 

and washers.

Securing Cradle 

Feet to Cradle

..............................  

Check that the weight plate selector dial is set to 10, if not follow the “How to Select 

desired training weight” instructions above, and set the dial to 10. Remove the MX Dumbbell Handset from 

the Cradle, which will remain in the box. Place the MX Dumbbell Handset on a firm flat surface, being careful 

not to damage the surface or the MX Dumbbell. CAUTION: The full weight (heavy) of the MX Dumbbell is 

activated by Selecting 10 on the weight plate selector dial.

Threaded holes for 

the Cradle Bolts 

and washers.

Do NOT add the Cradle Feet if intending to install the MX SELECT Dumbbells on the Optional MX Dumbbell Stand.  

Stop at Step 4 and then refer to the assembly instructions supplied with the MX Dumbbell Stand.

STEP  THREE

STEP  FOUR

STEP  SIX

STEP  FIVE

STEP  SEVEN

Reviews: