H.264MP-PTZ RTSP Streaming User’s Manual
3
• Make sure not to connect the power before you have installed the camera.
• There is great chance to damage your camera if the camera is opened by an unqualified
service engineer or installer.
• Avoid using the camera under direct sunlight (tropical area, Middle East), or near to any
source of heat. Sun shielding recommended.
• Don’t submerge the camera into water;
don’t install the camera upside down
• Avoid exposing the camera to violent movement or vibration.
• Must use proper “Relay” that will match with alarm output devices (High power spot light,
motors), never connect alarm output load > 0.5A directly to camera alarm out.
• Please use power adapter equipped with the camera, foreign power adapter with wrong
voltage may permanent damage your camera.
• Clean the glass dome bubble frequently to ensure good clear view, remove the snow and
ice accumulated outside and inside of class window shield, keep camera inside dry by hot
blow dryer.
• Must remove all cushions and lens cover inside dome bubble before power on.
Must read all the safety and operating instructions below before operating the unit.