16
Based on different welding position, there are different welding joint, see following images for more
information.
3.3 GROUND CLAMP CONNECTION
Clear any dirt, rust, scale, oil or paint on the ground clamp. Make certain you have a good solid ground
connection. A poor connection at the ground clamp will waste power and heat. Make sure the ground
clamp touches the metal.
3.4 ELECTRODE
The welding electrode is a rod coated with a layer of flux. When welding, electrical current flows between
the electrode (rod) and the grounded metal work piece. The intense heat of the arc between the rod and
the grounded metal melts the electrode and the flux. For best performance on this unit, we suggest the
use of 6013 electrodes.
3.5 SELECTING THE PROPER ELECTRODE
There is no golden rule that determine the exact rod or heat setting required for every situation. The type
and thickness of metal and the position of the work piece determine the electrode type and the amount
of heat needed in the welding process. Heavier and thicker metals required more amperage. It is best to
practice your welds on scrap metal which matches the metal you intend to work with to determine correct
heat setting and electrode choice. See the following helpful trouble shooting tips to determine if you are
using a correct electrode.
Summary of Contents for WAVE 200DIII
Page 25: ...25 ...