68
M1.3.TIG200PAC.NLFREN 21052019
EN
8�3 Keys operation description
8�3�1 Welding mode selection
Press when no load. You can choose different welding mode based on actual demands. This button is invalid in the middle
of welding. Mode switch will be rolling when welder is back to no load status. Please see description as below:
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
Fig. 8-9 Welding modes selection
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
8�3�2 Welding torch control mode selection
When under TIG mode or digital controlled torch mode, press to select different torch control mode based on actual
welding demands. This button is invalid in the middle of welding. Mode switch will be rolling when welder is back to no load
status. Please see description as below:
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
Fig. 8-10 Welding modes selection 1
When under TIG mode and adjusting torch control mode, press to select different torch control mode based on actual
welding demands. This key is invalid in the middle of welding. Mode switch will be rolling when welder is back to no load
status. Please see description as below:
17
/
50
E201 SC-A0
10.3 Keys Operation Description
10.3.1 Welding Mode Selection
Press
when no load; can choose different welding mode based on actual demands; this button is
invalid in the middle of welding; mode switch will be rolling when welder is back to no load status. Please
see description as below:
Manual Arc Welding AC TIG AC Pulse TIG DC TIG DC Pulse TIG
Fig 10-9 Welding Modes Selection
10.3.2 Welding Torch control mode selection
◆
when under TIG mode or digital controlled torch mode, press
to select different torch control
mode based on actual welding demands. This button is invalid in the middle of welding; mode switch
will be rolling when welder is back to no load status. Please see description as below:
2T
4T
Spot Welding
Fig 10-10 Welding Modes Selection 1
◆
when under TIG mode and adjusting torch control mode or pedal remote control box, press
to
select different torch control mode based on actual welding demands. This key is invalid in the middle
of welding; mode switch will be rolling when welder is back to no load status. Please see description as
below:
Pedal Remote Control or analog controlled torch mode
Fig 10-11 Welding Modes Selection 2
Note: this mode is on the premise that entering remote control mode through torch switch control.
Fig. 8-11 Welding modes selection 2
copyrighted
document
- all
rights
reserved
by
FBC
