6
WT500 - NLFREN - v1.0 - 10012017
EN
TOOLS
IMPORTANT
Please read these instructions carefully. Note the safety instructions and warnings. Use the product correctly and with
care for the purpose for which it is intended. Failure to do so may cause damage to property and/or personal injury.
Please keep this instruction manual safe for future use.
1 Safety instructions and warnings
•
Use a qualified person to maintain the table in good condition. Keep it clean for best and safest performance.
• The maximum load is 500 kg. Do not exceed this rated capacity.
• Use this table for lifting purpose only. Do not use it for any other purpose it is not designed to perform.
•
Keep children and unauthorized persons away from the work area.
• Remove loose clothing. Remove ties, watches, rings and other loose jewellery, and contain long hair.
• Wear ANSI approved safety goggles when operating the table.
•
Keep proper balance and footing, do not overreach and wear nonskid footwear.
•
Only use this table on a surface that is stable, level, dry and not slippery, and capable of sustaining the load. Keep the
surface clean, tidy and free from unrelated materials and ensure that there is adequate lighting.
• Set the brakes on the rear casters when loading or unloading.
• When not in use the table shall be fully lowered. Lock in a safe, dry place and keep away from children.
• Open release valve knob slowly to allow load to descend in a controlled manner.
• Before lowering table ensure that there are no obstructions underneath and that all persons are standing clear.
• Always keep your hands and feet away from moving parts.
• Do not allow people to sit or ride on the hydraulic table cart.
• Do not transports loads with hydraulic table cart in a raised position.
• Do not use the table if damaged, any suspect parts are noted or it has been subjected to a shock load.
•
Do not operate the table when you are tired or under the influence of alcohol, drugs or any intoxicating medication.
•
Do not make any modifications to the lift.
• Do not expose the table to rain or snow.
• If the table needs repairing and/or there is any part which needs to be replaced, have it repaired by authorized
technicians and only use the replacement parts supplied by the manufacturer.
WARNING!
The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the operator that
common sense and caution are factors which cannot be built into this product, but must be
supplied by the operator.
2 Specifications
Model
WT500
Capacity
500 kg
Table size
820 x 520 mm
Min. height
260 mm
Max. height
780 mm
Net weight
70 kg
copyrighted
document
- all
rights
reserved
by
FBC
