MW TOOLS 195330004, Manual

Page: 27 / 32

27
EN
M1.1.MWM1200.NLFREN 23082018
3�2 Function buttons
1. SELECT button
• Push to select alternate measurement modes on a rotary switch setting, including:
1. DC V / AC V
2. Resistance / Continuity / Diode / Capacitance
3. Celsius / Fahrenheit
4. DC µA / AC µA
5. DC A / AC A
2. Hz / Duty button
• When the rotary switch is at , push SELECT once to toggle to AC V testing mode, then push this button to enter
Frequency/Duty cycle (with high voltage) testing mode.
• When the rotary switch is at HZ , push this button to enter Frequency/Duty cycle (with low voltage) testing mode.
3. RANGE button
• Push this button once to enter the Manual Range mode. In Manual Range mode, each push increases the range. When
the highest range is reached, the next push will lead to the lowest range. To exit the Manual Range mode, turn the
rotary switch.
4. HOLD / Backlight button
• Push once to hold the current reading on the display. Push again to continue normal operation.
• Push for more than 2 seconds to turn on the backlight. Long-push again to turn off or the backlight automatically turns
off after 2 minutes.
6
Function Buttons
① ②
①
Selects alternate measurement modes on a
rotary switch setting, including:
1. DC V/AC V
2. Resistance/Continuity/Diode/Capacitance
3. Celsius/Fahrenheit
4. DC
μ
A/AC
μ
A
5. DC A/AC A
②
When the rotary switch is at , push
SELECT once to toggle to AC V testing
mode, then push this button to enter
Frequency/Duty Cycle (with high voltage)
testing mode.
When the rotary switch is at , push this
button to enter Frequency/Duty Cycle (with
low voltage) testing mode.
③
④
6
Function Buttons
① ②
①
Selects alternate measurement modes on a
rotary switch setting, including:
1. DC V/AC V
2. Resistance/Continuity/Diode/Capacitance
3. Celsius/Fahrenheit
4. DC
μ
A/AC
μ
A
5. DC A/AC A
②
When the rotary switch is at , push
SELECT once to toggle to AC V testing
mode, then push this button to enter
Frequency/Duty Cycle (with high voltage)
testing mode.
When the rotary switch is at , push this
button to enter Frequency/Duty Cycle (with
low voltage) testing mode.
③
④
copyrighted
document
- all
rights
reserved
by
FBC