3
POSITION
1. Never clean the unit with pressurized water jets.
2. Place the unit on a flat and stable surface.
3. Install the unit in a location where it can be overseen by trained personnel.
4. For good ventilation, keep 20 cm (7 inches) between the unit and walls or other objects.
Increase the distance if the objects surrounding are heating sources. When the unit is in
place, press the brake on the wheels to keep it from moving.
5. Fix the shelves on the unit.
ELECTRICAL CONNECTION
Before inserting the plug into the electrical socket, carefully read the following precautions:
1. Make sure that the unit is correctly connected to a properly grounded outlet, in compliance
with current safety standards.
2. Make sure that the voltage is in accordance with what is indicated on the rating label.
3. The current voltage available should beenough for the maximum energy required by the
unit.
4. If necessary, use multiple outlets, which are all properly grounded, in compliance with
current safety standards.
5. If in doubt, please consult qualified technicians.
THE REFRIGERATED SHOWCASE MUST BE CONNECTED TO AN ELECTRICAL SOCKET WITH A
GROUND.
OPERATION
Before using, the unit should be completely cleaned as it comes into contact with food.
1. Make sure that the main switch is in the (I) position, then plug in the unit.
2. Before starting the unit, ensure the sliding doors are properly closed.
3. Turn the main switch to the (I) position, the condensing unit will automatically start.
4. For lighting, press the lighting button. The lighting button is located on the thermostat.
5. If there is some condensation in front of the curved glass, please turn the switch to (I)
position for defogging.
6. Allow the unit to reach proper temperature before loading with product.
WORKING TEMPERATURE ADJUSTMENT
To reset the temperature inside the showcase, please follow as below:
Summary of Contents for Kool-It KGC Series
Page 14: ...13 ELECTRICAL DIAGRAM ...
