+44 (0)23 8052 2345
11
MV Heating UK Ltd
1.
Main Heater Body
2.
Control Unit (with accessory plug)
3.
Main Wiring Harness
4.
To Power Supply
5.
Fuse Holder
6.
External Temperature Probe
7.
Mounting Gasket
8.
Combustion Air Pipe Clamp
9.
Combustion Air Pipe
10.
Combustion Air Pipe Strap
11.
Combustion Pipe Silencer
12
. Exhaust Pipe Clamp
13.
Exhaust Pipe P-Clip
14.
Exhaust Pipe
15.
Exhaust Silencer*
16.
M6 Nut & Washer (x4)
17.
Fuel Pump
18.
Fuel Pump Mount
19.
Fuel Pump Damper
20.
Fuel Filter
21.
Fuel Pipe Connector
22.
Fuel Pipe Connector Clamp
23.
Fuel Pipe
24.
Fuel Standpipe
*Unsealed, must be installed outside of the vehicle. When purchased with a marine
kit, the silencer will be sealed, and attached to the exhaust pipe as part of a single
system
Figure VI shows the diagram for an Airo 2 installation. The position and ways
of fixing of various parts may vary from one vehicle/boat to another, but the
general principles remain the same.
Attention:
•
Do not mount the heater near any flammable sources
•
Do not install the heater in closed spaces without ventilation
•
Do not place the heater near anything that can cause a blockage
•
Do not mount the heater near any water sources and protect it from
any splashing or road debris