MV Agusta F4 BRUTALE 910 S, Use And Maintenance Manual

Page: 109 / 179

- 107 -
MAINTENANCE
6
6
6.4.1. Topping up the engine oil level
To top up the engine oil level, remove the oil filler
plug by using the 10 mm hexagonal bar supplied,
assembled on a proper key (see figure). Pour an
appropriate amount of engine oil of the recom-
mended type. Never exceed the MAX level mark.
At the end of the operation, place back the oil filler
plug.
WARNING
Before reassembling the oil filler plug,
grease its O-Ring by using AGIP Grease
30.
At last, perform the tightening of the oil
filler plug at the tightening torque of 35
Nm, by using a dynamometric key. Oil filler plug
CAUTION
To avoid clutch sliding and damage to
the engine, never add chemical addi-
tives to the engine oil, nor use an engine
oil different from the one specified in the
table at § 6.3. Make sure that no foreign
body gets in the crankcase while top-
ping up the engine oil.