HDMI 2.0/3G-SDI Signal Generator
© MuxLab Inc. 2017 94-000850-A / SE-000850-A
Page 21
to connect to the next Signal Analyzer down-stream. In this
way, many Signal Analyzers can be cascaded and controlled
easily.
5.
Set different Serial address for each Signal Generator and
Signal Analyzer (if any).
6.
On the first unit connect the RS232 Control port to the
controlling PC and connect the RS232 Cascade port to the
next down-stream Signal Analyzer or Signal Generator RS232
Control port, and so on.
7.
Use the DB9 to Phoenix cable to connect the first Signal
Analyzer to a PC.
8.
Setup the address table on the address management Menu.
9.
Please Note!
During first time setup you should address each
device independently.
[Please save settings before closing dialog!]
10.
Choose the machine by selecting the address from the
RS232 cable
