HDMI 2.0/3G-SDI Signal Generator
© MuxLab Inc. 2017 94-000850-A / SE-000850-A
Page 20
8.
USB Port Serial Driver Installation
For a Windows system, there is an executable available.
Download executable file from the website
:
http://www.ftdichip.com/Drivers/VCP.htm
Execute the downloaded file ‘ CDM v2.12.00 WHQL
Certified.exe ‘ to install the driver for FTDI USB-UART.
Or download the driver files and install the FTDI USB-UART
manually.
For other Operating Systems, you need to download the
driver files and install the FTDI USB-UART manually
.
9.
Cascading the Control Bus
1.
Connect the Signal Generator to an appropriate HDMI input
port on a sink device (such as a display).
2.
Connect the power supply to the unit. The unit can also
operate on the internal battery.
3.
The RS232 port or the USB port can be used for control.
4.
There are two RS232 ports. The first RS232 port is used for control,
while the second RS232 port is for cascading and can be used
