___________________________________________ _ _MuxMeet Share Base-2 Operation Manual
© MuxLab Inc. 2022 Page 56 94-000980-A/SE-000980-A
7.1.1.1
Wireless network configuration wizard
Enter a device name for the Base-unit. We recommend taking a descriptive name if you have more than one
MuxMeet Share Base-2
installed. The default name is “
MUX-5001
”.
Only "a-z","A-Z","0-9","-_" and space are legal characters.
Click “Next step”. The
following three connection methods are available:
7.1.1.2
Wireless Direct Mode
After Factory Reset, MuxMeet Share Base-2 unit starts up in the
“Wireless direct mode”
configuration, where the Base unit
creates its own wireless access point, which all transmitters use to connect. This is typical for a quick setup of small group
meetings. The Wi-Fi icon
for the “Wireless direct mode” is displayed in
the top status-bar of the Home screen.
Guest
connect to the access-point of MuxMeet Share Base-2, while
Staff
can also connect to the Base unit via Wi-Fi, or via a LAN
connection to their corporate network.
