HDMI 4K/ST2110 Over IP Uncompressed Gateway
Operation Manual
© MuxLab Inc. 2020
4
1.
Product Overview
1.1
Introduction
The HDMI 4K/SDI/ST2110 over IP Uncompressed Gateway Converter allows
HDMI equipment to be extended up to 1300ft (400m) via a duplex multimode
OM4 fiber with LC connectors, at up to 4K resolution @ 30Hz (4:4:4) 8-bit
uncompressed, in a point-to-point configuration. A single duplex multimode OM3
fiber with LC connectors may also be used at up to 985ft (300m). A second
Media/Data port is provided and can be used to support ST-2022-7 Redundancy
(Seamless Protection Switching), however a second MuxLab SFP MM fiber
module (model: 500970-MM) must be purchased separately for the second
Media/Data port per device.
Point-to-multipoint and multipoint-to-multipoint configurations are also possible by
connecting the unit 10G LAN ports (labelled as: Fiber 1 and/or Fiber 2 if installed)
for the 10G Media/Data of several units to a 10G Ethernet network.
The unit provides a 1G LAN port (labelled as: LAN) for Management/Control
purposes via a Web Interface and a RestAPI (Note: NMOS support is coming
soon).
The following diagram illustrates a typical point-to-multipoint LAN configuration
(with and without redundancy).
Figure 1a: Application Diagram without redundancy
