HDMI 4K/ST2110 Over IP Uncompressed Gateway
Operation Manual
© MuxLab Inc. 2020
15
Factory Reset
The user may perform a factory r
eset, by pressing on the “Reset” button. This will
return the unit to the original MuxLab factory settings, and all user settings and
data will be lost. Allow the process to complete without interruption.
Reboot
The user may reboot the unit (equivalent to a power cycle), by pressing on the
“Reboot” button. This will temporarily interrupt normal operation and the unit
connection. Allow the process to complete without interruption.
Logs
The user may get logs for his unit by
pressing on the “Download” button. This
may help identify the source of a possible issue you may be having, or to simply
get info on the unit operation.
2.1.5
Configuring the 500774-RX
This section will describe how to configure the unit using the Web interface. To
connect to the RX, open a Web browser and type the RX unit IP address.
Reference section 2.1 for the RX default static IP address and other details. Make
sure the unit 1G Ethernet port (port: LAN) is connected to your Ethernet network.
2.1.6
Receiver System Info Page
Once connected, the first screen is the System Info page, which displays general
product information such as the model number, firmware, FPGA version, MAC and
IP address, etc. See example below.
Figure 5: 500774-RX System Info Page
