© MuxLab Inc.
6G-SDI Extender Over UTP
Page 28
4. STATUS Command
status
Description:
Report current operation condition
Response:
“Master firmware version: x.x.x
User variable Version : 2
FPGA Version : RX 1.002 4
Status
SDI MODE : 3G SDI on 1 channel
SDI ratio : 0
SDI ref. : 148.5 MHz
SDI freq. : 148.505 MHz
HDMI freq.: 148.504 MHz
UTP version : 13090C10
UTP Bit Error Rate (10 exp -N) : (10=best, 0=worst )
Total : 10
Video : 0
Audio : 0
blank : 0
Ctrl : 0
UTP lane Status ( lower number = better )
Lane [ 41 , 48 , 39 , 37 ]
Lane [ 34 , 39 , 31 , 29 ]
Lane [ 32 , 37 , 32 , 30 ]
Lane [ 35 , 42 , 31 , 30 ]
UTP operating mode : 6”
5. VERSION Command
version
Description:
Report firmware version of the microcontroller
Response:
“
Master firmware version: x.x.x”
