© MuxLab Inc.
Multimedia 16x16 Matrix Switch Installation Guide
Page 45
alarm -n
<method id>
<state>
Description:
Enable/disable a notification method.
Arguments:
<method id>: b (beep), s (serial) or all
<state>: on or off
Example:
Disable the beep notification method
alarm –n b off
Response:
Alarm notifications applied successfully !
(or an error message if the command failed)
2. Connection
connect -i
<input port #>
-o
<output port #>
Description:
Connect a specific input to a specific output
Arguments:
<input port #>: 1 to 16
<output port #>: 1 to 16
Example:
Connect input 5 to output 10
connect -i 5 -o 10
Response:
[0,0,0,0,0,0,0,0,0,5,0,0,0,0,0,0]
(or an error message if the command failed)
connect -i
<input port #>
-o all
Description:
Connect a specific input to all outputs
Arguments:
<input port #>: 1 to 16
Example:
Connect input 5 to all outputs
connect -i 5 -o all
Response:
[5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5]
(or an error message if the command failed)
connect -i
<input port #>
-o
<from output port #>
..
<to output port #>
Description:
Connect a specific input to a consecutive range of outputs
Arguments:
<input port #>: 1 to 16
<from output port #>: 1 to 16
<to output port #>: 1 to 16
<from output port #> shall be inferior or equal to <to output port #>
Example:
Connect input 5 to outputs 8, 9, 10, 11, 12 and 13
connect -i 5 -o 8..13
Response:
[0,0,0,0,0,0,0,5,5,5,5,5,5,0,0,0]
(or an error message if the command failed)
connect -json
“[
<input port #1>,<input port #2>,…, <output port #16>
]”
Description:
Make
16
connections/disconnections
in one command using json format
Arguments:
<input port #>: 1 to 16 to specify the input port to connect to, or 0 to disconnect it
Example:
Connect input 5 to outputs 8, 9, 10, and connect input 8 to outputs 1,2 , and disconnect all other
outputs.
connect -json “[8,8,0,0,0,0,0,5,5,5,0,0,0,0,0,0]”
Response:
[8,8,0,0,0,0,0,5,5,5,0,0,0,0,0,0]
(or an error message if the command failed)