6
7
2. Setting up the X-Drone and
equipment batteries
Equipment
Power Supply
Controller
4 x AA Batteries
Smartphone Range Extender
The range extender needs to be charged
through the built in mini USB charging port
X-Drone
X-Drone Battery (see below)
2.1 X-Drone battery specifications
Capacity
5300mAh
Charging ambient temperature
0°C-50°C/32-122°F
Discharging ambient temperature
-20°C-50°C/-4-122°F
Charge/discharge ambient relative humidity
< 80%
2.2 Charging the X-Drone battery
Connect the X-Drone battery to the X-Drone battery charger and then connect the charger
to an AC power source (100-240V, 50/60Hz). Whilst charging the LED on the charger will
turn red, when fully charged the LED will turn green. After the battery is fully charged please
remove the battery and disconnect the charger.
2.3 Installing the X-Drone battery
Ensuring that the X-Drone is switched off, insert the battery into the battery compartment
on the X-Drone and lock the battery into position. If the battery lock is not fastened the
battery may not connect correctly which may affect flight safety or stop the X-Drone from
taking off.
2.4 Battery precautions
- Do not pull out the battery whilst the X-Drone is switched on as it may damage the unit.
- If the battery is not going to be used for a long time it is recommended that you
discharge the battery to a 40-50% charge level before storing. To maintain battery life
discharge and charge the battery every 3 months.
- Do not continue to use or charge the battery if there is any expansion or damage to the
battery.
3. Preparing the X-Drone
1. Propellers
2. Motor
3. Front Indicator
4. Camera Lens
5. Landing Gear
6. microSD card slot
7. X-Drone Battery
8. Tail Indicator
9. Power Switch
10. Rear Indicator
11. Battery Level Display
12. Battery Level Check Button
1
2
3
8
7
9
10
11
12
4
5
6
X-Drone Manual.indd 6-7
22/07/2015 14:28