26
How to regain control on the controller
If the X-Drone is out of control toggle the S4 switch on the controller several ti mes to switch
fl ight mode. When the signal is restored, the controller will regain control and you can
conti nue to use the controller to operate the X-Drone.
7.5 Batt ery level alarm functi on
When the X-Drone batt ery charge is low you must land it as soon as possible or else it may
lose power completely and crash. The X-Drone has a two level batt ery alarm functi on. Level
1 is a low power alarm and level 2 is a severe low power alarm. Both levels are indicates by
the fl ight indicator lights:
Low power
Flight indicator light status
Low power risk prompt
alarm level
Level 1
2 front indicators and 2 rear indicates
In level 1 alarm conditi on the X-Drone will fl y
will fl ash slowly.
normally for a few minutes and then initi ate
the level 2 alarm.
Be careful while fl ying, keep the X-Drone
within sight and do not fl y to high or too far.
Level 2
2 front indicators and 2 rear indicates
In level 2 alarm conditi on the X-Drone will fl y
will fl ash quickly.
normally for a few minutes and initi ate the
failsafe mode and start to automati cally
land.
When in level 2 alarm conditi on please
return and land the X-Drone as safely as
possible and do not push the thrott le hard
or make big movements during fl ight.
During low power automati c landing you can regain control of the X-Drone by switching the
fl ight mode (S4 switch). However do not do so repeatedly as it may reduce the batt ery life or
the X-Drone may crash due to insuffi cient power.
27
The free X-Drone app is available for iOS and Android and allows you to connect your
X-Drone to your phone using the in-built WiFi.
Install the app on your phone open the App Store (iOS) or Play Store (Android) on your
phone and use the search functi on to search for Muvi X-Drone. Select the app and then
click on the install butt on to install the app on your phone.
Connecti ng to the app
Turn on the controller, smartphone range extender and the X-Drone and then turn on the
WiFi on your phone and then enter the phone’s WiFi setti ngs. Look for X-Drone in the list
of available networks and select to connect. You may need to refresh the list or scan for
networks for the camcorder to appear. Please enter
MUVIXD01
as the password.
Exit the WiFi setti ngs and open the X-Drone app on your phone. To fi nish connecti ng tap
in the app.
8. Using the X-Drone app
X-Drone Manual.indd 26-27
22/07/2015 14:28
