11
MUVI
Owner's Manual
CONTROLS
1. HIGH AND LOW BEAM
This button lets you switch between high and low
beam. You can flash the high beam by pressing the
part closest to you
.
2. BLINKERS
To signal your intentions on the road
you should always
use the blinkers before turning. This warns other
drivers of your manoeuvre. Move the lever to the left
to activate the left blinkers and to the right to activate
the right ones. Press the button to deactivate the
blinkers.
3. REAR BRAKE - COMBINED BRAKE SYSTEM
To brake using the CBS system, squeeze this
lever.
This system balance the brake force between rear
wheel (main presure) and the front wheel (light braking
force).
4. HORN
Press this button to sound the horn. It emits a high
tone.
5. DISCONNECTION BUTTON
Move the button to the right to put the motorbike into
STOP mode. The motorbike will remain on.
6. FRONT BRAKE
This lever brakes only on the front wheel.
Braking with this breke give a efective and reactive
braking force. But if you squeeze the lever forcefully
in an abrupt manner the wheel will lock and the
motorbike will lose stability. Always squeeze the brake
levers gently.
7. ACCELERATOR
Move your wrist downward to rotate the grip and send
power to the motor. To keep all components in good
condition avoid applying maximum acceleration in an
abrupt manner.
8. SET BUTTON
For more information on the SET button read the
corresponding page (page 21).
9. IGNITION SWITCH
For more information on the ignition switch read the
https://www.motomanuals.net/
