2
USER MANUAL
VIII REMOVING THE HARNESS FOR CLEANING
1. To remove the belts, put the securing ends all the way through the holes in the seat.
ATTENTION:
There are 5 harness attachment points.
WARNING!
ALWAYS refit the harness correctly after cleaning and before reusing them.
IX ADJUSTING THE SHOULDER STRAP POSITION
1a. Follow the steps above to remove the shoulder belts.
1b. Put the shoulder belts through the upper or lower holes in the seatback.
X CONVERTING TO MINI STOOL MODE.
1a. Remove the tray (step V).
1b. Lay the Stool down, flat on the floor.
2. Remove 4 x 25 mm Leg Cross Brace Bolts and detach Leg Cross Brace from the Stool.
3. Remove the 4 x Bo�om Legs from their designated slots and replace them
with 4 x Mini Stool feet.
4. Secure the Mini Stool Feet and Leg Cross Brace with the previously
used 4 x 20 mm Leg Bracing Bolts.
The chair is now ready for use in Mini Stool Mode.