The basket bag
Unfold the sub-frame to assemble the
basket.
· Position the basket between the tubes
of the bottom frame with the logo facing
upwards.
· Pull the straps from the front of the
basket around the vertical black
metal wires and fix the press studs.
Use the press studs at the end of the
straps.
· Pull the velcro straps from under the
basket to the sides, around the tubes
of the bottomframe and fix the velcro
under the basket.
The brake (g)
A brake pedal is fitted to both the front
and rear of the pushchair. You can use
any pedal to block or unblock the push-
chair.
· Press the brake pedal down with your
foot to block the pushchair.
· Push the brake pedal up to unblock the
pushchair.
The swivel system (h)
The swivel wheels can be put in a fixed
or in a swivelling position. The swivel
wheels can be fixed facing either for-
wards or backwards.
· Move the slider under the footrest to
the right. The front wheels can now
revolve.
· Move the slider under the footrest to
the left. The swivel wheels lock as soon
as they are facing straight forward.
The pushchair seat
The pushchair seat is suitable for child-
ren from 6 months of age up to 15 kg
that can sit independently.
In the packaging the foot end is not
fitted to the framework.
· Fit the tube by sliding both plastic con-
nectors of the foot end into the plastic
connectors on the top frame simultane-
ously.
· Ensure that the foot end clicks into
place correctly on both sides.
· Place the fabric over the foot end of the
framework, starting with the inside and
working outwards. Use the zip to fasten
the upholstery.
Fitting the pushchair upholstery (t)
In the packaging the pushchair uphol-
stery is already fastened to the frame-
work. This is a description of how you
re-attach the upholstery. For example,
after using the carry cot.
· Place the upholstery inside the frame-
work. Place the foot end of the uphol-
stery at the foot end of the framework.
This is the narrower end.
· Slide the plastic fastening strips of
the upholstery into the grooves on the
underside of the framework. Begin with
the strips at the head end (t1), followed
by the strips at the foot end (t2).
· Place the fabric over the head and foot
end of the framework, starting with the
inside and working outwards. Use the
zip to fasten the upholstery.
Disassembling the pushchair upholstery (t)
Work in reverse order as indicated in
illustration t.
· Unzip the head and foot end of the
upholstery.
· Slide the plastic fastening strips out
of the grooves on the underside of the
framework. Start with the strips at the
foot end (t2) and then the strips at the
head end (t1).
Rotating the push bar (k)
The seat is fitted with a rotating push
bar. You can rotate the push bar for-
wards or backwards. This makes it
easier to use with the swivel wheels at
the front or the rear.
· Turn the buttons for the rotation of the
push bar in the direction indicated on
the buttons.
· Rotate the push bar to the desired
position. The push bar locks auto-
matically when you release the but-
tons.
Placing the top frame on the sub-frame
(i + j + k)
! In order to place the upper frame onto
the lower frame, the rotating push bar
must be set in the correct position. The
push bar is in the correct position when
the arrows on the sides of the upper
frame are visible (i).
· Hold the push bar in a vertical position
English
23
