Setup 9: Prevent Stick menu 81
Setup 9: Prevent Stick menu
Sets up to prevent media from sticking when printing starts.
Setting values
The stick-prevent operation is not
performed.
This is the initially set value.
The stick-prevent operation is performed.
Feed the media back and forth to prevent
from sticking.
Note
When the “Output Mode menu” is set to “Take-up”, the setting for the “Prevent Stick menu” is disabled.
Setup 10: Standby Heating
Sets the time to preheat Heater while the printer is in the standby mode.
When the preset time has passed, each Heater turns Off.
Use
or
to enter the value, and tap [Enter].
Setting values
10 min to <60 min>
<> indicates the initial value.
Setup 11: Head Travel
Sets up the range that Print head moves while printing.
Setting values
Print head moves the range of the print
data width.
Print head moves from origin to the
maximum printable media width.
Print head shifts within the media width.
This is the initially set value.
Setup 9
Prevent Stick
Prevent Stick:
Off
Prevent Stick:
On
Setup 10
Standby Heating
Standby Heating:
(10 - 60)
60 min
Setup 11
Head Travel
Head Travel:
Data
Head Travel:
Machine
Head Travel:
Media
Summary of Contents for XPJ-1641SR
Page 8: ...8 ...
Page 52: ...52 Menus you can access while printing Note ...
Page 160: ...160 The media is jammed Note ...
Page 166: ...XPJ16xxSRE A 01 ...
