VJ-1304 INSTALLATION MANUAL
5
VJ1304E-I-00
1
2
1
2 3 4
5
1
2
1
6 Turning the power ON / OFF
This section explains how to turn ON/OFF the printer.
6.1 Turning the power ON
Follow the procedure below to turn ON the printer.
1. Press the [Power] key on the operation panel to
turn ON the printer.
The Power lamp on the operation panel lights up
in green.
The printer starts initial operation.
When the initial operation is complete, the printer
enters normal status.
6.2 Turning the power OFF
Follow the procedure below to turn OFF the printer.
1. Regarding the operating condition of the printer,
confirm the following.
Printing or other operations are not in progress.
The operation panel is in normal status.
The head height is set to Low.
2. Press the [Power] key on the operation panel to
turn OFF the printer.
The Power lamp on the operation panel turns OFF.
If the operation panel is in the following status, the
power is ON.
The [Power] key is pressed in.
The Power lamp lights up in green.
Press the key once again and turn OFF the power.
The printer starts operating to turn the power OFF.
The operation panel displays "Power Off".
If the head height is set to High, the operation pan-
el displays "Change Head gap Low".
Lower the Head height adjustment lever.
Operation Manual "4.2.5.2 When returning
the print head to the original position"
All the lamps on the operation panel and the LCD
monitor are turned OFF.
The printer automatically turns the power OFF.
7 Installing ink cartridges
This section explains how to install ink cartridges.
Follow the steps below to install ink cartridges.
1. Turn ON the product.
The product starts initial operation.
After the initial operation, the operation panel dis-
plays "Insert CleaningCart.".
2. Take out the cleaning cartridge from the bag.
3. Install the cleaning cartridge into the ink cartridge
slots.
Install the cleaning cartridge with mark facing
to the product.
Insert the cartridge all the way into the product.
The product starts filling cleaning fluid.
4. After the cleaning fluid is filled, take out the clean-
ing cartridge.
The operation panel displays "During washing"
and the product starts head cleaning.
After the head cleaning, the operation panel dis-
plays "Insert InkCartridges".
5. After the head cleaning, take out the ink cartridge
from the bag and shake it gently two to three times
before installing.
Slots for ink cartridges are specified depending on
colors of the ink cartridges.
Match the mark on each slot with the color of the
ink cartridge.
Install the ink cartridges with mark facing to the
product.
Insert the cartridge all the way into the product.
"Ink Refill **%" is displayed on the operation
panel and ink replenishment starts.
The ink replenishment takes about four minutes.
Ink filling operation and pause operation are re-
peated during the ink replenishment.
When "100%" is displayed, the ink replenishment
is complete.
After the ink replenishment is complete, "Media
End" is displayed on the operation panel.
(Continue to next)
5 Connecting the power cable
This section explains how to connect the power cable.
Make sure that the included power ca-
ble is used.
If other power cables are used, it may
cause an electric shock or fire.
Do not use a damaged power cable. It
may cause an electric shock or fire.
Follow the steps below to connect the power cable.
1. Confirm that the product is turned OFF.
If the [Power] key is pressed, the product is turned
ON. Press the key again, and turn OFF the power.
2. Connect the power cable to the AC inlet on the
back of the product.
3. Correctly insert the power cable plug into the pow-
er socket.
No.
Name
1
Ink cartridge
2
Ink cartridge slot K
3
Ink cartridge slot C
No.
Name
4
Ink cartridge slot M
5
Ink cartridge slot Y
No.
Name
1
Cleaning cartridge
No.
Name
2
Ink cartridge slots
No.
Name
1
AC inlet
No.
Name
1
Power cable
No.
Name
2
Power Cable
NOTE
NOTE
NOTE
WARNING
