manualshive.com logo in svg

MUTOH ValueJet VJ-628X, Operation Manual

Share
Download
MUTOH ValueJet VJ-628X Operation Manual Download Page 83

Handling messages/error messages     83

When the following message is prompted on the MSM, a smartchip error such as broken chip may have occurred in the ink 

cartridge.

Check that the correct color is inserted in the cartridge slot and perform smartchip recovery.

This will allow you to continue to print.

To perform smartchip recovery, do one of the followings according to the message appeared.

Smartchip recovery

Display

Description

S/C card Recognition Error No. :********

An ink cartridge that needs smartchip recovery may have been installed.

Remove the ink cartridge and reload it.

If the printer is still unable to read it, install a new ink cartridge.

• If a message “Check that correct color is correctly installed. No. :****” 

appears after the ink cartridge is reloaded, follow the message “Check that 

correct color is correctly installed. No. :****” to operate.

Check that correct color is correctly installed. No. :****

An ink cartridge that needs smartchip recovery may have been installed.
Check that the ink color of the cartridge inserted is correct.

• In case of wrong color insertion, load a correct ink color cartridge.

• If color is correct, press the [Enter] key. The printer will perform smart chip 

recovery and will continue to print.

Note

During smartchip recovery execution, the ink cartridge being recovered highlighted in yellow in the S/C Card Information of MSM.

Summary of Contents for ValueJet VJ-628X



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands