manualshive.com logo in svg

MUTOH ValueJet VJ-628X, Operation Manual

Share
Download
MUTOH ValueJet VJ-628X Operation Manual Download Page 61

Cleaning of cleaning wiper     61

[5]

Short press the operation key on the operation panel.

• The carriage moves to the maintenance position inside the front 

cover.

[6]

Open the front cover.

Important!

When cleaning the cleaning wiper, please note the followings.

• Use a cleaning stick in dry condition. If moisten with water or solution, it can cause damage to the print head.

• Do not reuse a cleaning stick. Dusts can adhere causing damage to the print head.

• Standard cleaning time should be within 5 minutes. If it takes longer, the stick can dry causing damage to the print head.

[7]

Wipe the cleaning wiper with a cleaning stick.

• Wipe the left side surface of cleaning wiper going back and forth.

[8]

Wipe the right side surface of cleaning wiper going back and forth.

[9]

Wipe the right side surface of the base of cleaning wiper going back 
and forth.

[10]

Close the front cover.

[11]

Short press the operation key on the operation panel.

• The carriage moves to the original position inside the front cover.

Press!

Press!

Summary of Contents for ValueJet VJ-628X



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands