manualshive.com logo in svg

MUTOH ValueJet 1324, Operation Manual, Page: 8 / 15

Share
Download
MUTOH ValueJet 1324 Operation Manual Download Page 8

ERRATA 

VJ-1324 OPERATION MANUAL 

June 2018 

VJ1324E-A-04c 

8 

MUTOH INDUSTRIES LTD. 

5.1.25  Header Dump menu 

This function is to specify whether to print the following information (dump data) of print data. 

・

 

Data Header 

・

 

Number of Dot in Data (Printed only when the header dump setting is "On".) 

・

 

Printer Serial Number 

・

 

Firmware Version   

・

 

Data size 

・

 

Data receiving time 

 

・

 

The dump data will be used as a reference material to receive technical supports. 

・

 

When a print is executed in connection with computer, the setting of RIP software will be 

printed in the "Data Header". 

 

 

Setup Item 

Set Value 

  Description 

Header Dump 

<Off> 

・

 

Only a print data will be printed. 

・

 

Damp data will not be printed. 

On 

After printing of print data, the dump data will be printed. 

Dump 

・

 

Only a dump data will be printed, but the "Number of Dot in 

Data" will not be printed. 

・

 

Print data will not be printed. 

Print 

Prints the last header dump. 

If no history is available, “No Print Data” will appear on the operation 

panel. 

— 

・

 

[Enter] key: saves the setting and shifts to the next menu. 

・

 

[Cancel] Key: Save the set value, and return to the previous 

menu. 

Operation manual “5.1 Setup menu” 

 

 

 

Summary of Contents for ValueJet 1324
















Reviews:

No comments