MUTOH ValueJet 1324, Operation Manual, Page: 1 / 15

June 2018
VJ1324E-A-04c 1 MUTOH INDUSTRIES LTD.
Some contents of the Operation Manual are changed. Please see the following list.
 The content of this documents are based on the specification of the firmware Ver.3.04 or later.
Chapter Item Description Revision
Chapter
3
3.5.1 “Nozzle check”
The printer information (date and time of
printing, printer’s serial number, firmware
version) is printed on the nozzle check
pattern. 04c
Changed the adjustment method
in “3.6 Adjust Print”
Refer to sheet 2 04b
Chapter
4
Changed the adjustment method
in “4.2.6. Media feed
compensation”
Refer to sheet 3-4
04b
Chapter
5
Added the menu in ”5.1.1.1 User
Type menu”
Refer to sheet 5 04b
Added “5.1.1.1.9 Media thickness
menu”
Refer to sheet 5 04b
Added “5.1.1.1.10 UserCopy
menu”
Refer to sheet 6 04b
Added "5.1.6.2 Page Gap menu".
Refer to sheet 6 04b
Added "5.1.17.2 Print Stop menu". Refer to sheet 7
04b
Added "5.1.17.3 Near End menu". Refer to sheet 7
04b
Modified the description of “5.1.25
Header Dump menu”
Refer to sheet 8
04c
Added "5.1.26 Start Feed menu".
Refer to sheet 9 04b
Added "5.1.27 Heater Control
menu".
Refer to sheet 9 04b
Added "5.1.28 Alert Buzzer menu".
Refer to sheet 10 04c
Chapter
6
Revised the description of "6.3
Disposal of waste fluids".
Refer to sheet 11
04a
Chapter
9
Modified the diagram in
“9 Setup menu diagram”
Refer to sheet 12-15 04c
VJ-1324
OPERATION MANUAL ERRATA