impression of a nuclear fission reactor during ‘melt-down’ – not advisable!
Seriously though, do be careful!
20. Turn transceiver on and find week fm signal. Now adjust the attenuator on
the SLNA 145sb with the trimming tool provided until the slightest
degradation in signal to noise ratio is noticed. Than back off this
adjustment vary slightly. It is quite normal for the correct position of the
attenuator to be perhaps only 15 or 20 degrees from full clockwise travel.
This adjustment carefully done with result in the maximum dynamic range
of system.
21. Replace both top and bottom covers.
22. Installation is complete!
muTek limited
rf technology
Retyped by YU7WL
