> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
88
\
B E D I E N E L E M E N T E
B E D I E N E L E M E N T E
B E D I E N E L E M E N T E
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
Manual SDs-01 D 3.2.2003 17:45 Uhr Seite 3
13
OPERATION
Selecting Function Menus and setting Functions
The device is fully operated using the two toggle switches at the front
panel.
1
Switching the MENU key toggles between different basic function menus.
2
Switching the SELECT key activtes individual functions within one
function menu.
Steps of Operation
1
First press on »MENU« or »SELECT« key enables the last selected function
within the last selected function menu. The corresponding LED is
beginning to flash.
2
Every press on »SELECT« button will select a new function within a menu.
The LED of the selected function flashs accordingly. After the LED stops
flashing, the funcltion is activated.
3
When the needed function is selected, do not press the switches again!
After a period of approx. 4 seconds the LED of the selected function stops
flashing.
The STATUS area is not accessible by using the »MENU« and »SELECT« keys,
because it only informs about different conditions of incoming signals.
Safety Instructions
For safety reasons, be sure to
read the SAFETY INSTRUCTIONS
and INSTALLATION chapters before first
powering-up!
We also recommend reading the CONTROL
ELEMENTS AND TERMINALS chapter for
information on how to connect MC-1.1+ !
!
User Settings Remain
All user-specific function settings
are available furthermore when
power is restored.
!
Shut-Down of Outputs
All digital audio outputs are shut-
down during function selection!
After a function is finally selected and the
corresponding LED lights constantly again,
the digital audio outputs are activated for
signal transfer.
!
Functions
Menus
Menus
Functions
2. SELECT
selects individual
functions within
one function
menu.
1. MENU
selects individual
function menus.
MENU + SELECT operation
