� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
��
�
� � � � � � � � � � � � � �
� � � � � � � � � � � � � �
� � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
��������������������������������������������
17
APPENDIX
Pin Assignment of the Connectors
MAINS
3
2
1
1
3
2
1 Live, phase (brown; USA: black)
2 Protective earth (green/yellow; USA: green)
3 Neutral (blue; USA: white)
AES/EBU XLR-Output
AES/EBU XLR-Output
CINCH: OUPUT
BNC-OUTPUT
1 Audio signal
1 Signal
2 Audio ground
2 Ground
2
1
1
2
1 Audio ground
2 a conductor (hot / +)
3 b conductor (cold / -)
2
3
1
1 Audio ground
2 a conductor (hot / +)
3 b conductor (cold / -)
Ground-lift of Word Clock Input
Place the unit, front panel towards you, on a table and remove the steel-
plate cover after unscrewing the six screws holding it. Locate the BNC jacks
on the rear of the unit (see WC/SC) and follow them all the way inside the
enclosure. Locate the DIP switch next to the BNC connectors (standard posi-
tion: »ON«). Carefully set the switch to position »OFF« to lift the ground of
the Word/Super Clock input.
CAUTION! Disconnect the unit from
the mains before opening!
Remount the steel-plate cover
thoroughly before you attempt to
operate the unit!
!
!
