7
ENGLISH
ELECTRICAL INTERCONNECTION
FUSE
replace the fuse, make sure to use the same type of fuse with the same rating.
BEFORE CONNECTING
For the professional installation of a sound system, car audio retail stores offers appropriate wiring kits. Ensure
purchase your wiring kit. Clean and remove rust-streaked and oxidized areas on the contact points of the bat-
POWER
Connect the POWER + terminal (+12V) with the +12V pole of the vehicle’s battery. Use a suitable
reasons the distance between the fuse block and the battery should be shorter than 30 cm. Do not set
in the fuse into the fuse block until the installation is accomplished.
Connect the POWER – terminal (ground) with a suitable contact ground point on the vehicle’s chas-
sis. The ground wire must be as short as possible and must be connected to a blank metallic point at
the vehicle’s chassis. Ensure that this ground point has a stable and safe electric connection to the
negative “–”pole of the battery. Check this ground wire from the battery to the ground point if possible
same size like the po power supply wire. This helps reduce most of the interference than can
occur in audio reproduction.
1
2
1
2
Make sure the connection polarity is as indicated on the terminals. A misconnection may
WARNING
