background image

24

11. Focus Color

The focus peaking has three color options Red, Green and Blue.

Note: When the OSD menu or ON/OFF menu is removed from the

screen, the focus color function will be activated or deactivated.

12. Camera Mode

The Camera mode (activated by pressing the front panel button) turns
on DSLR Scaling. Some cameras do not display the correct output and
this corrects the problem. When the using Camera mode it will:

1) Fill the screen and remove the black area that can be seen in

auto-mode.

2) Prevent distortion.
3) There will not be a black clip when starting video record.

13. H Mirror (Horizontal)

This allows the image to be flipped horizontally.

14. V Mirror (Vertical)

This allows the image to be flipped vertically.

15. Nine Grid

When this feature is turned on it helps frame the image easily. Two
equally spaced vertical and horizontal lines are put on the screen
dividing it into thirds in each direction creating 9 equal boxes. When the
grid is displayed each of the nine boxes can be selected by turning the
Knob. When a box is selected, pressing the Knob will magnify that box
and fill the complete screen. Pressing the Knob again to return the
display to the full screen mode.

Summary of Contents for M-702-4K series






























Reviews: